PA5070-11-6-2CBG

SKU (0330) DUAL 5070-11-6-2CBG was known as DUAL 5070dx11-2conn

11el Two Connectors Dual Band Antenna 6m – 4m 5070dx11-2Conn
Great dual band 6m 4m Antenna 11 elements 5070dx11-2Conn with separate connectors. One for 50MHz and one for 70MHz band.

Spare your free space on tower for another antennas.

Two antennas on single boom behaves as two mono band antennas.

This high gain antenna will produce excellent signals with 59+ reports on both bands. 6m and 4m. Devoted for contesting and DX hunting

F/B and G/T superiority.
All antennas have been calculated using state of the art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns and connectors. The performance of antennas designed using these techniques are exceptional, far better than antennas designed using “wire” programs.

What 5070dx11-2Conn mean?
5070 band– 6m 50MHz and 4m 70MHz band with low SWR
dx – Intended for use for DX hunting and contesting
11 elements – 5 elements for 6m DX-ing and 6 elements for 4m DX-ing
2Conn – Each band has its own connector. One for 50MHz and one for 70MHz

Electrical Specifications 5070dx11-2Conn on 6m band

• Frequency Range: 50-50.5 MHz
• Free Space Forward Gain: 10.9 dBi
• Front to Back Ratio: 21 dB
• -3 dB Horizontal Beam width: 51°
• Polarization: Horizontal
• Nominal Input Impedance: 50 Ohms
• SWR Across Entire Band: < 1.2
• Maximum Power Input: 1000 W (1500W, 2500W and 8000W by order)
• Matching Method: Direct feed through common mode choke (current balun)
• Connector: “N” (7/16 DIN)

Mechanical Specifications 5070dx11-2Conn on 6m band (PA5070-11-6-2CBG)

• Number of Elements: 5
• Elements Diameter: 12 mm, extensions 10 mm and 8 mm
• Dipole Diameter: 12 mm, extensions 10 mm and 8 mm
• Longest Element: 3.1 meter
• Balun and Connector: Included

Electrical Specifications 5070dx11-2Conn on 4m band

• Frequency Range: 70-70.5 MHz
• Free Space Forward Gain: 11.2 dBi
• Front to Back Ratio: 20 dB
• -3 dB Horizontal Beam width: 51.4°
• Polarization: Horizontal
• Nominal Input Impedance: 50 Ohms
• SWR Across Entire Band: < 1.2
• Maximum Power Input: 850 W (1500W, 2500W and 7500W by order)
• Matching Method: Direct feed through common mode choke (current balun)
• Connector: “N” (7/16 DIN)

Mechanical Specifications 5070dx11-2Conn on 4m band

• Number of Elements: 6
• Elements Diameter: 12 mm, extensions 10 mm
• Dipole Diameter: 12 mm, extensions 10 mm
• Longest Element: 2.1 meter
• Balun and Connector: Included

Common Mechanical Specifications for Dual Band 6m 4m Antenna 13 elements 5070dx11-2Conn

• Overall number of elements: 11
• Element Mounting Position: Below the boom
• Boom Length: 5.4 meter
• Boom Size: Tapered Boom 20×20, 30×30, 40x40mm
• Turning Radius: 3.5m
• Number of Boom Pieces: 4
• Guy rope support: Yes, Included
• Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
• Clamp: 2x M8 Stainless Steel
• Survival Wind Speed: 160 km/h
• Net Weight: 8.7 kg
• Gross Weight: 10.3 kg
• Transportation Length: 1.5 meter