JNCRADIO NanoVNA-F V2 - 3G Mini Vector Network Analyser

NanoVNA-F_V2 is a new generation of portable, stand-alone vector network analyser with 4.3″ IPS LCD screen, metal enclosure, 5000 mAh battery and SMA connectors. It is a product based on edy555’s NanoVNA and OwOComm’s S-A-A-V2. The measurement frequency range of NanoVNA-F V2 is up to 3GHz. The S21 dynamic range is greater than 70dB at 50kHz-1.5GHz and greater than 60dB at 1.5GHz – 3GHz. NanoVAN-F V2 can work continuous for 7 hours due to the large capacity battery and low-power design.

Features / Specifications:

• Frequency range: 50kHz ~ 3GHz
• S11 dynamic range: 50dB(50kHz ~ 1.5GHz), 40dB(1.5GHz ~ 3GHz)
• S21 dynamic range: 70dB(50kHz ~ 1.5GHz), 60dB(1.5GHz ~ 3GHz)
• RF output power: -9dBm
• Frequency tolerance: 0.5ppm
• Screen: 4.3″ IPS LCD, 800*480, RTP touchpad
• Operation via touch screen or 3 side buttons
• Battery: 3.7V Li-Po, 5000mAh
• Aluminium enclosure: 125mm x 75mm x 20mm
• SMA female RF port
• Sweep points: 101
• Calibration result storage: 5
• Calibration result interpolating supported
• Traces: 4
• Markers: 4
• Measures: S-parameter, VSWR, smith chart, phase, ploar, etc.
• Mark table can be moved up and down
• Firmware upgrade via U-disk with type-c cable
• USB power output: 5V/1A
• Compatible with NanoVNA-saver, support screenshot
• CE&FCC
• ROHS certified

Included in Box:

• NanoVNA-F V2 x1
• 20cm SMA-JJ RG405 Cable x2
• Calibration kit: SMA OPEN/SHORT/50ohm LOAD
• SMA-KK adapter x1
• SMA-JJ adapter x1
• SMA-JKW adapter x1
• USB Type-C cable x1
• Stylus x1